Description
Application areas:
Suitable for all metals for machining operations where emulsifiable oil are normally used. The recommended concentration is between 5 to 10 % depending on the severity of machining. Sometimes used successfully for even grinding operations.
Detail Description
This is general-purpose emulsifiable oil and forms milky white emulsion.
Performance benefits:
- Good surface finish
- Built in protection against bacterial growth Excellent emulsion stability
- Good heat removal properties
Physico-chemical properties
| PROPERTIES | TYPICAL VALUES |
|---|---|
| KOOLKUT 40 | |
| Colour After Emulsification | Milky White |
| Kinematic Viscosity @ 40 °C, Min, cSt | 20 |
| Flash Point, COC °C, Min | 150 |
| Copper Corrosion @100 °C, Min | 1 |
| Cast Iron Corrosion Test, 20:1 Emulsion with 400 PPM Hard Water Max | 0/1-1 |
| Emulsion Test: 400 PPM Hard Water 5:1 and 20:1 Ratio | PASS |
